DA 30-HT-D
12-32 Volts
The fully redundant DA 30-HT-D has been developed for applications with highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels should fail. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The position sensor features a three channel design (for 2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 interface.
Technical Data
Choose your unit
General
| Width (Metric) | 30 mm |
| Width (Imperial) | 1.18 inch |
| Supply voltage (rated) | 28 VDC |
| Interface | RS 485 |
Specific
| Standard Mode | |
|---|---|
| Rated Current | 4.5 A |
| Peak Current | 7.8 A |
| Rated Torque (Metric) | 36 Nm |
| Rated Torque (Imperial) | 318.627 ozf-in |
| Peak Torque (Metric) | 64 Nm |
| Peak Torque (Imperial) | 566.448 ozf-in |
| No Load Speed | 165 °/s |
| Rated Speed | 115 °/s |
Other Products
DA 30
24-32 Volts
| Width (Metric) | 30 mm |
| Width (Imperial) | 1.18 inch |
| Supply voltage (rated) | 28 VDC |
| Rated Torque (Metric) | 8.0 Nm |
| Rated Torque (Imperial) | 70.806 ozf-in |
| Peak Torque (Metric) | 16 Nm |
| Peak Torque (Imperial) | 141.612 ozf-in |
| No Load Speed | 230 °/s |
| Rated Speed | 150 °/s |
| Interface | PWM , RS 485 |
More about Standard Actuator DA 30
DA 30-D
12-32 Volts
| Width (Metric) | 30 mm |
| Width (Imperial) | 1.18 inch |
| Supply voltage (rated) | 28 VDC |
| Rated Torque (Metric) | 20 Nm |
| Rated Torque (Imperial) | 177.015 ozf-in |
| Peak Torque (Metric) | 32 Nm |
| Peak Torque (Imperial) | 283.224 ozf-in |
| No Load Speed | 200 °/s |
| Rated Speed | 110 °/s |
| Interface | RS 485 |
More about Redundant Actuator DA 30-D
DA 30-HT
24-32 Volts
| Width (Metric) | 30 mm |
| Width (Imperial) | 1.18 inch |
| Supply voltage (rated) | 28 VDC |
| Rated Torque (Metric) | 18 Nm |
| Rated Torque (Imperial) | 159.313 ozf-in |
| Peak Torque (Metric) | 32 Nm |
| Peak Torque (Imperial) | 283.224 ozf-in |
| No Load Speed | 165 °/s |
| Rated Speed | 100 °/s |
| Interface | PWM , RS 485 |
More about Standard Actuator DA 30-HT
