DA 22

10-30 Volts

We offer our DA 22 actuators in a short and a long case version - the longer being more powerful, i.e. offering higher continuous torque capabilities.

The CNC machined sealed cases, made of saltwater resistant aluminum, comply with the IP 67 standard for water/dust resistance and provide EMI/RFI shielding. All types of our DA 22 actuators use all steel gear trains with ISS gear protection system as an option and are fully programmable (motor overload protection, Fail Safe position in case of PWM command signal lost, etc.). Integrated M8 round male connector (optional MIL specified connector or integrated cable with screwed cable gland). The cases offer integrated lug mounts for both horizontal and vertical installation.


DA 22-12-2615 - short design (51 mm)
Even though this actuator is rather compact and light it features a relatively high continuous torque output of 80 Ncm (110 oz-in). It can be used for functions with average continuous loads, where speed is of lesser importance (like ailerons and flaps in smaller UAVs).

Optional: ISS gear protection system; extended travel angle up to 330°; position feedback device, RS-485 protocol, customized cases.


DA 22-12-4112 – long design (71 mm)
Its high continuous torque of 120 Ncm (170 oz-in) make it the proper choice for applications with relatively high continuous loads and where speed is of lesser importance like on flaps, control surfaces or undercarriage retraction in fixed wing applications.

Optional:

  • ISS gear protection system;
  • extended travel angle up to 330°;
  • position feedback device,
  • RS-485 protocol,
  • customized cases.

MATLAB Simulink Model on Request

Technical Data

Choose your unit

General

Width (Metric) 22 mm
Width (Imperial) 0.87 inch
Interface PWM, RS 485

Specific

DA 22-12-2615...
Supply voltage (rated) 12 VDC
Rated Current 0.4 A
Peak Current 0.8 A
Rated Torque (Metric) 0.8 Nm
Rated Torque (Imperial) 7.081 lbf‐in
Peak Torque (Metric) 1.6 Nm
Peak Torque (Imperial) 14.161 lbf-in
Rated Speed 120 °/s
No Load Speed 210 °/s
DA 22-12-4112...
Supply voltage (rated) 12 VDC
Rated Current 0.75 A
Peak Current 1.7 A
Rated Torque (Metric) 1.2 Nm
Rated Torque (Imperial) 10.621 lbf‐in
Peak Torque (Metric) 3 Nm
Peak Torque (Imperial) 26.552 lbf-in
No Load Speed 250 °/s
Rated Speed 180 °/s
DA 22-30-2630…
Supply voltage (rated) 28 VDC
Rated Current 0.18 A
Peak Current 0.3 A
Rated Torque (Metric) 0.7 Nm
Rated Torque (Imperial) 6.188 lbf‐in
Peak Torque (Metric) 1.5 Nm
Peak Torque (Imperial) 13.25 lbf-in
No Load Speed 240 °/s
Rated Speed 160 °/s
DA 22-30-4128…
Supply voltage (rated) 28 VDC
Rated Current 0.35 A
Peak Current 0.6 A
Rated Torque (Metric) 1.8 Nm
Rated Torque (Imperial) 15.938 lbf‐in
Peak Torque (Metric) 3.0 Nm
Peak Torque (Imperial) 26.5 lbf-in
No Load Speed 180 °/s
Rated Speed 110 °/s

Download area

DA 22 Datasheet
pdf
1.7 MB
DA 22 StepFiles
zip
5.3 MB