DA 26-D
12-32 Volts
The fully redundant DA 26-D actuator for applications with highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels should fail. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The position sensor features a three channel design (for 2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 interface.
For a complete description of the Redundancy Concept please have a look into the data sheet.
Technical Data
Choose your unit
General
| Width (Metric) | 26 mm |
| Width (Imperial) | 1.02 inch |
| Supply voltage (rated) | 28 VDC |
| Interface | RS 485 |
Specific
| Standard Mode | |
|---|---|
| Rated Current | 1.7 A |
| Peak Current | 3.3 A |
| Rated Torque (Metric) | 5 Nm |
| Rated Torque (Imperial) | 44.254 lbf‐in |
| Peak Torque (Metric) | 12 Nm |
| Peak Torque (Imperial) | 106.209 lbf-in |
| No Load Speed | 250 °/s |
| Rated Speed | 170 °/s |
