DA 15-N

5-30 Volts

The DA 15‐N is our smallest and lightest full brushless actuator.
Its brushless motor and contactless, wear free position sensing system makes the DA 15‐N immune to wear, vibrations and shock loads. It has especially been designed for the usage in harsh environments and for safety critical applications that require an actuator with high endurance. The conductive aluminum case and the shielded connection cable are reducing the susceptibility to any kind to EMI/RFI noise to the absolute minimum. The servo features position, temperature and current feedback as a standard and is fully programmable

Advantages of the full brushless actuator:

  1. Maximized service life through vibration‐resistant, brushless DC motor
  2. Brushless motor technology eliminates the typical electromagnetic noise of brush‐type motors and provides ultra‐long endurance
  3. Contactless, wear free position sensing system
  4. Aluminum housing with minimal weight and size in functional design
  5. The saltwater‐resistant, HART‐coat treated aluminum housing withstands at least 100 hours of saltwater spray without damage and meets the IP‐67 standard for water and dust protection
  6. Excellent immunity to any kind of electromagnetic noise achieved with aluminum housing, low electromagnetic emissions through brushless motor
  7. Several programming possibilities, e.g. overload protection of the internal electric brushless motor, which allows reducing the motor current if the motor is being overloaded

Optional:

  • ISS gear protection system;
  • extended travel angle up to 330°;
  • position feedback device,
  • RS-485 protocol,
  • customized cases.

MATLAB Simulink Model on Request

Technical Data

Choose your unit

General

Width (Metric) 15 mm
Width (Imperial) 0.59 inch
Interface PWM, RS 485, CAN, Single Ended Serial

Specific

DA 15‐N-06-BLDC-...
Supply voltage (rated) 6 VDC
Rated Current 0.5 A
Peak Current 1.5 A
Rated Torque (Metric) 0.16 Nm
Rated Torque (Imperial) 1.416 lbf‐in
Peak Torque (Metric) 0.6 Nm
Peak Torque (Imperial) 5.310 lbf-in
No Load Speed 290 °/s
Rated Speed 235 °/s
DA 15‐N-12-BLDC-...
Supply voltage (rated) 12 VDC
Rated Current 0.35 A
Peak Current 0.85 A
Rated Torque (Metric) 0.25 Nm
Rated Torque (Imperial) 2.213 lbf‐in
Peak Torque (Metric) 0.6 Nm
Peak Torque (Imperial) 5.310 lbf-in
No Load Speed 330 °/s
Rated Speed 240 °/s
DA 15‐N-30-BLDC-...
Supply voltage (rated) 28 VDC
Rated Current 0.2 A
Peak Current 0.45 A
Rated Torque (Metric) 0.25 Nm
Rated Torque (Imperial) 2.213 lbf‐in
Peak Torque (Metric) 0.6 Nm
Peak Torque (Imperial) 5.310 lbf-in
No Load Speed 360 °/s
Rated Speed 260 °/s
DA 15-N-06-BLDC-32-…
Supply voltage (rated) 6 VDC
Rated Current 0.5 A
Peak Current 1.5 A
Rated Torque (Metric) 0.11 Nm
Rated Torque (Imperial) 0.975 lbf‐in
Peak Torque (Metric) 0.4 Nm
Peak Torque (Imperial) 3.538 lbf-in
No Load Speed 540 °/s
Rated Speed 410 °/s
DA 15-N-12-BLDC-32-…
Supply voltage (rated) 12 VDC
Rated Current 0.35 A
Peak Current 0.85 A
Rated Torque (Metric) 0.18 Nm
Rated Torque (Imperial) 1.594 lbf‐in
Peak Torque (Metric) 0.4 Nm
Peak Torque (Imperial) 3.538 lbf-in
No Load Speed 620 °/s
Rated Speed 415 °/s
DA 15-N-30-BLDC-32-
Supply voltage (rated) 28 VDC
Rated Current 0.2 A
Peak Current 0.45 A
Rated Torque (Metric) 0.18 Nm
Rated Torque (Imperial) 1.594 lbf‐in
Peak Torque (Metric) 0.4 Nm
Peak Torque (Imperial) 3.538 lbf-in
No Load Speed 670 °/s
Rated Speed 450 °/s

Download area

DA 15-N Datasheet
pdf
1.2 MB
DA 15-N StepFiles
zip
2.2 MB

Other Products