DA 20
5-8 Volts
The housings of our DA 20 series are made of CNC-machined aluminum die-cast elements with a lower casing made of fibreglass-reinforced plastic. The aluminum parts are rugged, torsion-resistant and dissipate internal heat. As with all our actuators, the DA 20 also has a steel gear train and is fully programmable using our programming tool (available as accessories).
DA 20-06-2505
This actuator differs from the DA 20-06-2503 in its higher continuous load capacity and with its increased service life along with lower actuator travel speed and power. ..
Optional:
- ISS gear protection system;
- increased actuator travel up to 330°;
- analog position feedback
Technical Data
Choose your unit
General
| Width (Metric) | 20 mm |
| Width (Imperial) | 0.79 inch |
| Interface | PWM |
Specific
| DA 20-06-2503... | |
|---|---|
| Supply voltage (rated) | 6 VDC |
| Rated Current | 0.8 A |
| Peak Current | 3.0 A |
| Rated Torque (Metric) | 0.22 Nm |
| Rated Torque (Imperial) | 1.947 ozf-in |
| Peak Torque (Metric) | 1.1 Nm |
| Peak Torque (Imperial) | 9.736 ozf-in |
| No Load Speed | 520 °/s |
| Rated Speed | 490 °/s |
| DA 20-06-2505... | |
|---|---|
| Supply voltage (rated) | 6 VDC |
| Rated Current | 0.6 A |
| Peak Current | 2.3 A |
| Rated Torque (Metric) | 0.3 Nm |
| Rated Torque (Imperial) | 2.655 ozf-in |
| Peak Torque (Metric) | 1.5 Nm |
| Peak Torque (Imperial) | 13.276 ozf-in |
| No Load Speed | 320 °/s |
| Rated Speed | 280 °/s |
| DA 20‐12‐2515… | |
|---|---|
| Supply voltage (rated) | 12 VDC |
| Rated Current | 0.45 A |
| Peak Current | 0.8 A |
| Rated Torque (Metric) | 0.8 Nm |
| Rated Torque (Imperial) | 7.063 ozf-in |
| Peak Torque (Metric) | 1.6 Nm |
| Peak Torque (Imperial) | 14.188 ozf-in |
| No Load Speed | 210 °/s |
| Rated Speed | 130 °/s |
| DA 20‐30‐2515… | |
|---|---|
| Supply voltage (rated) | 28 VDC |
| Rated Current | 0.3 A |
| Peak Current | 0.6 A |
| Rated Torque (Metric) | 0.5 Nm |
| Rated Torque (Imperial) | 4.438 ozf-in |
| Peak Torque (Metric) | 1.2 Nm |
| Peak Torque (Imperial) | 10.625 ozf-in |
| No Load Speed | 520 °/s |
| Rated Speed | 400 °/s |
| DA 20‐30‐2530… | |
|---|---|
| Supply voltage (rated) | 28 VDC |
| Rated Current | 0.2 A |
| Peak Current | 0.3 A |
| Rated Torque (Metric) | 0.7 Nm |
| Rated Torque (Imperial) | 6.188 ozf-in |
| Peak Torque (Metric) | 1.5 Nm |
| Peak Torque (Imperial) | 13.25 ozf-in |
| No Load Speed | 240 °/s |
| Rated Speed | 160 °/s |
Other Products
DA 20-T
10-30 Volts
| Width (Metric) | 20 mm |
| Width (Imperial) | 0.79 inch |
| Supply voltage (rated) | 14 VDC, 28 VDC |
| Rated Torque (Metric) | 0.15 Nm |
| Rated Torque (Imperial) | 1.328 ozf-in |
| Peak Torque (Metric) | 0.3 Nm |
| Peak Torque (Imperial) | 2.655 ozf-in |
| No Load Speed | 420 °/s |
| Rated Speed | 270 °/s |
| Interface | PWM |
DA 20-TS
12-32 Volts
| Width (Metric) | 20 mm |
| Width (Imperial) | 0.79 inch |
| Supply voltage (rated) | 28 VDC |
| Rated Torque (Metric) | 0.15 Nm |
| Rated Torque (Imperial) | 1.328 ozf-in |
| Peak Torque (Metric) | 0.3 Nm |
| Peak Torque (Imperial) | 2.655 ozf-in |
| No Load Speed | 420 °/s |
| Rated Speed | 270 °/s |
| Interface | RS 485 |
